Thermal Characterization of Fe50Co50 and Fe65Co35 Nanostructured Alloys

Daniel Arrieta Grandinson, Gladis Miriam Aparicio Rojas, Zulia Isabel Caamaño De Ávila

Resumen


Las aleaciones magnéticas nanoestructuradas a base de FeCo se destacan entre las aleaciones magnéticas convencionales a base de Fe por presentar óptimas propiedades magnéticas blandas, requeridas en una variedad de aplicaciones tecnológicas, industriales y biomédicas.

 

En este trabajo se presentan los resultados obtenidos de la caracterización térmica por calorimetría diferencial de barrido y termogravimetría magnética de polvos puros de Fe y Co, y de polvos magnéticos nanoestructurados a base de Fe50Co50 y Fe65Co35 preparados por el método de Aleado Mecánico de elevada energía.

 

Por medio de estas técnicas y bajo la influencia de diferentes atmósferas inertes como Helio (He), Nitrógeno (N2) y Argón (Ar), se evidenciaron los eventos térmicos que tienen lugar desde temperatura ambiente hasta 900 °C para muestras molidas a diferentes tiempos (0, 10, 15, 20 y 25 horas), eventos tales como las temperaturas de transición magnética y de orden – desorden características de este tipo de muestras y del proceso de molienda.

 

Palabras clave: Caracterización Térmica, Análisis Termogravimétrico, Termogravimetría Magnética, Aleaciones Nanoestructuradas, Aleado Mecánico, Transiciones de Fase.


 


Texto completo:

PDF

Referencias


Akkouche K, Guittoum A, Boukherroub N, Souami N (2011) Evolution of structure, microstructure and hyperfine properties of nanocrystalline Fe50Co50 powders prepared by mechanical alloying. J Magn Magn Mater 323: 2542-2548.

Morán López J, Rodríguez López J (2012) Nanostructured materials, their properties and applications in the scientific and technological revolution of the 21st century, FCE, SMF, México.

Chermahini, Sharafi S, Shokrollahi H, Zandrahimi M, Shafyei A (2009) The evolution of heating rate on the microstructural and magnetic properties of milled nanostructured Fe1-xCox (x = 0.2, 0.3, 0.4, 0.5 and 0.7) powders. J Alloy Compd 484: 54-58.

Kishimoto M, Latiff H, Kita E, Yanagihara H (2019) Morphology and magnetic properties of FeCo particles synthesized with different compositions of Co and Fe through co-precipitation, flux treatment, and reduction. J Magn Magn Mater 476: 229-233.

Dong D., Fang Q, Wang W, Yang J (2017) Temperature Characteristics and Magnetization Mechanism of Fe1.2Co Films. J Magn Magn Mater 442: 295-299.

Zeng Qi, Baker I, McCreary V, Yan Z (2007) Soft ferromagnetism in nanostructured mechanical alloying FeCo-based powders. J Magn Magn Mater 318: 28-38.

Bergheul S, Otmane F, Azzaz M (2012) Structural and microwave absorption properties of nanostructured Fe-Co alloys. Adv Powder Technol 23: 580 582.

Pérez Alcázar G, Zamora L, Marco J, Romero J, González J, Palomares F (2012) Magnetic and Structural Characterization of Mechanically Alloyed Fe50Co50 Samples. Revista De Ciencias 15: 41-47.

Rincón Soler A I, Rodríguez Jacobo R R, Medina Barreto M, Cruz Muñoz B I (2017) Structural and magnetic behavior of the FeCo system obtained by mechanical alloying. Hyperfine Interact 238: DOI: 10.1007/s10751-017-1419-5.

Yepes N, Orozco J, Caamaño Z, Mass J, Pérez G (2014) Preparation and characterization of Fe50Co50 nanostructured alloy. J Phys Conf Ser 480: 012012. Doi:10.1088/1742-6596/480/1/012012.

Echeverria K (2014) Synthesis and Characterization of Nanostructures Based on Fe65Co35, Degree work, Physics program, Faculty of Basic Sciences, Universidad Del Atlántico, 90 p.

Estrada CA, Parra CA, Pimentel JL. (2017). Propiedades estructurales, eléctricas y magnéticas en el sistema Na0.25 Ba0.75CoO3. BISTUA Revista de la Facultad de Ciencias Básicas, 15 (1). doi: https://doi.org/10.24054/01204211.v1.n1.2017.2557.

Alleg S, Souilah S, Suñol J (2013) Thermal Stability of the Nanostructured Powder Mixtures Prepared by Mechanical Alloying 21-44. InTech Open, DOI: 10.5772 / 54151.101.

Khajepour M, Sharafi S (2012) Characterization of nanostructured Fe-Co-Si powder alloy. Powder Technol 232: 124-133.

Caamaño De Ávila Z I, Consuegra Peña M A, Baró M D, Suriñach S (2015) Synthesis and characterization of nanostructured materials based on Fe50Co50 and Fe75Co25. Journal CT&F 6 (2): 33-44.

Rueda J, Hernández A. (2015). Growth of single-cristalline strontium titanate fibers using LHPG. BISTUA Revista de la Facultad de Ciencias Básicas 13: 24-28. https://doi.org/10.24054/01204211.v2.n2.2015.1796.

Murcia J.J, Guarin J.R, Cely Macias A.C, Rojas H, Cubillos J.A, Hidalgo M.C, Navio JA (2017) Methylene blue degradation over M-TiO2 photocatalysts (M=Au or Pt). Ciencia en Desarrollo.8(1): 109-117.




DOI: https://doi.org/10.24054/01204211.v2.n2.2019.3533

Enlaces refback

  • No hay ningún enlace refback.